specification control drawing te connectivity 305 constitution drive menlo park, ca 94025, usa raychem products title : coaxial pinpak unless otherwise specified dimensions are in millim eters. inches dimensions are between brackets. document no .: b-046-xx-n tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 15-apr-11 doc issue: 7 drawn by: m. foronda replaces: d990606 prod. rev. see table dcr number: d010002 scale: none size: a sheet: 1 of 1 print date: 9-may-11 if this document is printed it becomes uncontrolled . check for the latest revision. pin dimensions ?m max = 0.68 (0.027) ?m max = 0.88 (0.035) product dimensions cable dimensions product rev product rev pitch product name product name h ? 0.3 (h ? 0.012) ?a min ?b min ?c min l max k nom ?d ?e ?f min. b-046-14-n c 2.54(0.10) 3.4 2.3 0.8 28 14 1.7(0.0 65) 1.3(0.050) 0.3 b-046-10-n b b-046-11-n b 5.08(0.20) (0.135) (0.090 ) (0.030) (1.100) (0.550) to to (0.012) b-046-12-n b b-046-13-n b 6.35(0.25) 3.4(0.135 ) 2.3(0.090) b-046-15-n a 2.54(0.10) 4.4 2.8 1.6 30 14 1.7(0.0 65) 1.5(060) 0.3 b-046-66-n a b-046-68-n a 5.08(0.20) (0.175) (0.110 ) (0.060) (1.180) (0.550) to to (0.012) b-046-16-n a b-046-18-n a 6.35(0.25) 4.4(0.175 ) 2.8(0.110) materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinyliden e fluoride. 2. solder preform with flux: solder: type sn63 per ansi-j-std-006. flux: type rol1 per ansi-j-std-004. 3. meltable ring: thermally stabilized thermoplasti c. color:clear. 4. termination pin: c519oo per astmb103. plating: t in-lead solder per sae ams-p-81728 55%sn min. application 1.these controlled soldering devices are designed f or termination of coaxial cables to printed circuit boards. they will terminate the tin plated or silver pla ted copper center conductor and braid of a coaxial cable having an insulation rated for at least 125 ? c. the lead may need to be aligned prior to inserti on into the board. 2.temperature range: -55 ? c to +150 ? c. for installation, see rpip-500-03. for best results, prepare the cable as shown:
|